TABLE STRUCTURE
- Bridge Type Table Rigid Construction, 2 lines undercoat and 2 lines epoxy painting, covers and protections
- Completely heat treatment applied structure, full milling and high strength body, stainless steel edge profile
- Zero (reference) point with proximith switches and extra limit switches
- Completely open area for loading and unloading of material
- Interchangeable galvanized grids table
MACHINE TYPES AND TABLE SIZES
WJ1515 (1500 mm x 1500 mm)
WJ1530 (1500 mm x 3000 mm)
WJ2030 (2000 mm x 3000 mm)
WJ2040 (2000 mm x 4000 mm)
WJ2060 (2000 mm x 6000 mm)
WJ3040 (3000 mm x 4000 mm)
WJ3060 (3000 mm x 6000 mm)
MOVEMENT SYSTEM
- 2 lines of linear guides on the both sides in bellows (X and Y axes)
- High accuracy rack and pinion, ball bearing thrust system of X and Y axes
- All X, Y and Z axis driven by servomotors
- Electronic centrilized lubrication system
- High quality mechanic and electric components (generally german made)
MECHANICAL SENSITIVITY
- Cutting Accuracy ± 0.06 mm
- Repeatability ± 0.05 mm
- Highest cutting speed X-Axis 0 – 34.000 mm/min
- Highest cutting speed Y-Aksis 0 – 34.000 mm/min
PUMP SPECIFICATION
- High Presure Intensifier Pumps 50 HP
- Intensifier: 1
- Max. pressure (Bar): 4.000 bar
- Motor power (Hp): 50
- Water consumption (LPM): 3.7 lt/min
Intensifier rate (cyc/min): 40
Intensifier rate (oil/water): 20 - HP Pump 40 HP, 50 HP, 60 HP, 75 HP, 100 HP
- CNC Controller: FAGOR CNC
- Cutting Head : KMT IDE / IWP
- Cam Software: Igems CAM / Lantek CAM
- Accesories: Abraziv Transfer Units / Abraziv Dozing Units
- Anti back wash valve
- Auto Abrasive transfer system
- 200 Liter of capacity, It forwards garnet abrasive to cutting head with comprossed air
- Abrasive amount and pressure sensor
- Visual and audial warning system
CNC CONTROL UNIT AND CAM SOFTWARE
- FAGOR CNC control unit, English or any language panel
- Display, touch screen: TFT WVGA 800×480 pixel (11”)
- Supply 24 VDC
- Entegrated with CAM Software
